CD4051BE

240Ohm Analog Switches BREAK-BEFORE-MAKE CD4051 16 Pins 100nA 5V 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Manufacturer's number: CD4051BE
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 5
SKU: 2502-CD4051BE
Pricing:we created an exceptionally flexible and competitive pricing policy.

Quantity:

Add to RFQ list

Details

Tags

Parameters
Lifecycle Status	ACTIVE (Last Updated: 18 hours ago)
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	240Ohm
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	CD4051
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Polarity	Non-Inverting
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	20V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	80nA
Propagation Delay	60 ns
Quiescent Current	80nA
Turn On Delay Time	720 ns
Input Voltage (Min)	-0.5V
Logic Function	Demultiplexer, Multiplexer, Mux
Input Voltage (Max)	20.5V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3V~20V ±2.5V~9V
Supply Type	Dual, Single
Bandwidth	20MHz
Supply Current-Max (Isup)	3mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	240Ohm
Min Dual Supply Voltage	2.5V
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 30pF
On-state Resistance Match-Nom	15Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Min Supply Voltage (DC)	3V
Drain to Source Resistance	240Ohm
Normal Position	NC
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD4051BE Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. There are 1 circuits in this switch device. Try searching with CD4051 to find analog multiplexer variants. An switch multiplexer with 240Ohm internal resistance has a value of 240Ohm. Datasheets for 16 pin functions are available upon request. Multiplexers should not be powered above 20V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 3V. An operating current of 80nA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 9V. It is recommended that you attach at least 2.5V to your dual power supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 18V operating voltages can be used with this electrical part. Operating the 8 inputs requires 8 inputs. There are 20MHz bandwidths for data transfer. It has a Drain to Source resistance of 240Ohm ohms.